OT Tables — Electric, Hydraulic & C-Arm Compatible Surgical Tables by Nipex India

What Is an OT Table? — Definition & Clinical Role

An OT table — also called an operating table, surgical table, or operation theatre table — is the central piece of equipment in every surgical suite. It supports the patient during the entire procedure while allowing surgeons to:

• Raise or lower the patient to the ergonomically correct height for each surgeon
• Tilt into the Trendelenburg position (head-down) or reverse Trendelenburg (head-up) at angles up to 30°
• Rotate laterally for access during complex abdominal or thoracic procedures
• Accommodate the C-arm machine through a radiolucent tabletop that allows X-rays to pass without obstruction

A well-engineered OT table directly reduces procedure time, surgical team fatigue, and patient risk. Poor-quality surgical tables that block fluoroscopy imaging or lose stability under load are a clinical hazard — especially in image-guided and high-load procedures.

Types of OT Tables — Complete Classification

By Mechanism — Manual, Hydraulic, Electric & Motorized OT Tables Compared

Type	Mechanism	Best Use	Key Advantage
Manual OT Table	Hand-crank by staff	Small clinics, basic procedures	No power needed, lowest cost
Hydraulic OT Table	Foot-pedal pumps hydraulic fluid	hydraulic OT table for areas with power cuts	No electricity needed, highly durable
Electric OT Table	Electric motors + remote	electric OT table for busy multi-specialty hospitals	Fastest, most precise positioning
Electro-Hydraulic OT Table	Electric remote + hydraulic backup	Premium hospitals needing speed + reliability	Best of both — ideal for India
Motorized OT Table	All-motor on every axis	fully motorized OT table for robotic surgery	Maximum precision, fastest setup

By Specialty — Orthopaedic, Gynaecology, Neurosurgery & More

Specialty Table	Key Design Features	Surgeries Performed
Orthopaedic OT Table	Traction boots, hanging attachments, heavy-duty frame, C-arm clearance	best OT table for orthopaedic surgery — joint replacements, fractures
Gynaecology OT Table	Lithotomy position crutches, drainage tray	C-section, hysterectomy, laparoscopic gynae
Neurosurgery OT Table	Skull clamps, multi-axis headrest, anti-vibration locks	Brain surgery, cervical spine procedures
Ophthalmic OT Table	Low height, stable head support, anti-glare mattress	Cataract, retinal surgery, glaucoma
Bariatric OT Table	Reinforced stainless steel base, extra-wide surface, 400 kg capacity	High-BMI patients — any surgical intervention
C-Arm Compatible OT Table	Radiolucent tabletop, offset cantilever base	C-arm compatible OT table manufacturer India — vascular, ortho
Urology OT Table	Kidney bridge, perineal cutout, drainage channel	TURP, cystoscopy, kidney stone procedures

Technical Specifications — Nipex India OT Tables (All Models — CE Mark + ISO 13485)

Model	Height Range	Max Load	Trendelenburg	From Price
Manual OT Table	750–950 mm	200 kg	15° / Lat 12°	₹25,000
Hydraulic OT Table	750–950 mm	200 kg	20° / Lat 15°	₹45,000
Electric OT Table	700–1000 mm	250 kg	25° / Lat 20°	₹2,00,000
Electro-Hydraulic	700–1000 mm	280 kg	30° / Lat 20°	₹1,50,000
C-Arm Compatible	700–1000 mm	300 kg	30° / Lat 20°	₹80,000
Bariatric OT Table	680–980 mm	400 kg	25° / Lat 18°	₹1,80,000

Note: Prices may vary based on model, features, and customization.

All models: 5-section radiolucent tabletop • stainless steel base • floor locking castor • antistatic mattress • battery backup (electric models) • CE Mark + ISO 13485 documentation provided

OT Table Price in India 2026 — Factory-Direct from Nipex India, New Delhi (₹ Guide)

The OT table price in India varies by mechanism, features, and load capacity. As a direct New Delhi manufacturer, Nipex India eliminates all dealer markups. You pay factory price:

OT Table Type	Starting Price	Max Price	Best For
Manual OT Table	₹25,000	₹50,000	Day-care, basic procedures
Hydraulic OT Table	₹45,000	₹99,000	hydraulic OT table price in India — general surgery
C-Arm Compatible	₹80,000	₹2,70,000	C-arm compatible OT table manufacturer India
Electric OT Table	₹2,00,000	₹4,80,000	Multi-specialty, high-volume hospitals
Orthopedic OT Table	₹1,20,000	₹4,30,000	best OT table for orthopedic surgery
Bariatric OT Table	₹1,80,000	₹5,30,000	Bariatric surgery centers

Note: Prices may vary based on model, features, and customization.

How to Choose OT Table for Hospital — 5-Step Buying Guide

1. Match table type to your surgeries. A orthopedic OT table needs traction boots and C-arm machine clearance. A gynecology OT table requires the lithotomy position crutches. General surgery needs a versatile multi-position surgical table.
2. Assess power reliability. Frequent outages? Choose a hydraulic OT table or electro hydraulic OT table — both function without stable electricity.
3. Check weight capacity. Standard OT tables hold 150–200 kg. For heavier patients, invest in a bariatric OT table rated to 400 kg from the start.
4. Evaluate imaging needs. If surgeons use C-arm fluoroscopy intraoperatively, you must have a radiolucent tabletop with offset cantilever base — not all 'C-arm compatible OT table' models provide full rotation.
5. Calculate total cost of ownership. The hydraulic OT table price in India may look cheaper upfront but factor in hydraulic fluid replacement, spare parts, and warranty terms over a 10-year lifecycle.

OT Table Maintenance Protocol — Standard Schedule for Indian Hospitals

After Every Procedure

• Wipe radiolucent tabletop and antistatic mattress with hospital-grade disinfectant (70% isopropyl alcohol or equivalent)
• Inspect floor locking castor — confirm engage/release functions correctly
• Test remote control on electric OT table and motorized OT table models — verify all positions respond

Monthly Maintenance

• Check hydraulic fluid levels on all hydraulic OT table and electro hydraulic OT table models
• Lubricate all moving column joints and mechanisms with medical-grade lubricant
• Test full range of motion: Trendelenburg, reverse Trendelenburg, lateral tilt, height adjustment

Annual Service

• Full hydraulic fluid replacement — every 12 months or 500 procedures, whichever comes first
• Electrical safety testing and insulation resistance check on electric OT table models
• Antistatic mattress assessment — inspect for tears, moisture ingress, foam compression

Why Hospitals Choose Nipex India — OT Table Manufacturer in Delhi with Pan-India Reach

Advantage	What It Means for Your Hospital
CE Mark + ISO 13485:2016	International medical device quality standards — NABH/JCI accreditation documentation provided
OT table manufacturer in Delhi	Direct factory pricing — zero dealer markup from our New Delhi facility
Pan-India Delivery	Dispatched in 2–3 days. Metros 3–5 days. Tier-2/3 cities within 10 days
Free Installation + Training	On-site installation and staff training included in most cities
1–2 Year Warranty	Hydraulic fluid service, spare parts always stocked, no discontinued parts problem
Full Customization	Custom width, height range, accessory config for bulk orders

Frequently Asked Questions — OT Tables, Operating Tables & Surgical Tables in India

A: Hydraulic OT table uses a foot-pedal pump and hydraulic fluid to raise/lower the table — works without electricity, ideal for areas with power cuts. Electric OT table uses electric motors with a handheld remote — faster and more precise, preferred in busy high-volume hospitals. Our electro hydraulic OT table combines both — electric remote with hydraulic power backup — the most reliable configuration for Indian hospital conditions.

A: A C-arm compatible OT table has two critical features: a radiolucent tabletop (carbon fiber or special polymer that lets X-rays pass through clearly) and an offset cantilever base so the C-arm machine can rotate 360° without its base hitting the table legs. All Nipex India radiolucent OT table models are verified for full C-arm fluoroscopy clearance.

A: The OT table price in India from Nipex India ranges from ₹25,000 (manual) to ₹5,00,000 (bariatric). The most popular model, the hydraulic OT table, starts at ₹55,000. An electric OT table starts at ₹2,20,000. A C-arm compatible OT table begins at ₹80,000. All are factory-direct prices — no dealer markup.

A: The Trendelenburg position tilts the patient head-down at 15°–30° — used in pelvic, lower abdominal, and vascular surgery. The reverse Trendelenburg tilts the head upward — used in head, neck, and upper abdominal procedures. All Nipex India OT tables support both positions.

A: Standard operating tables safely support 150–200 kg. Electric and motorized OT table models handle 250 kg. Orthopedic models reach 300 kg. Nipex India's bariatric OT table supports up to 400 kg — with reinforced stainless steel base and extra-wide surface.

A: Yes. Every OT table from Nipex India carries CE marking and is manufactured under ISO 13485:2016 — the international standard for medical device manufacturers. Certification documentation is provided for NABH/JCI accreditation records.

A: After every procedure: clean radiolucent tabletop and antistatic mattress. Monthly: check hydraulic fluid, lubricate joints, test full range of motion. Annually: complete hydraulic fluid replacement (12 months or 500 procedures), electrical safety testing on electric OT table models, and mattress inspection.

A: For orthopedic surgery, your OT table must have: a radiolucent tabletop for intraoperative C-arm fluoroscopy, offset base for 360° C-arm rotation, traction boots and hanging attachment compatibility, and minimum weight capacity of 300 kg. Nipex India's orthopedic OT table models satisfy all four requirements.